Because application and conditions vary, and are beyond our control, we are not responsible for results obtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the product for the intended use (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product or refund of its price. Under no circumstances are we liable for incidental and consequential damages.
Non-Skid Paint comes with a 30-day money back guarantee. (See our Shipping and Returns page for complete details).
Yes, ADA recommend a minimum average Static Coefficient of Friction rating of at least 0.60 for level floors, and 0.80 for incline ramps. Non-Skid Paint far exceeds those requirements in all testing (ranging from 0.87 Dry and 0.85 Wet) Static Coefficient of Friction. See our Coefficient of Friction test results page.
Clean Non-Skid Paint with warm water mixed with any mild soap or detergent. Use a firm bristle brush and rinse off thoroughly with clean water.
It is recommended that on low to medium traffic area’s to topcoat once every 2-3 years. On area’s with a lot of high traffic to topcoat once every 1-2 years as needed.
Non-Skid Paint is environmentally safe to use. Easily clean hands and tools with warm soapy water immediately after application.
YES, it is recommended to use Polar White Non-Skid Paint to lighten any color of choice. For color consistency use a 1 to 2 ratio for mixing a color to achieve a lighter shade. (Example: for every 2 gallons of Shipstone Gray add 1 gallon of Polar White together in a large bucket to achieve a Light Gray Color, stir and mix thoroughly).
The Grit material in Non-Skid Paint settles to the top of can, and sometimes sticks to the lid. This is because the Grit is lighter than the Epoxy and will stay suspended and not sink to the bottom of can after thoroughly mixed. Its best to scrap any Grit that is stuck to the lid back into the paint with a wood stir-stick; so as to not loose the normal textured surface. Mix well before and during application.
NO, Non-Skid Paint is a Water Reducible Epoxy-Ester Coating and can only be thinned with water. Add no more than ½ quart of water per gallon for first coat only. (NOTE: Topcoat must be applied directly from pail without thinning)
NO, Non-Skid Paint Epoxy is (pre-mixed) with Grit. Extra Grit Additive is recommended to increase the texture for applications such as Incline Ramps, and Stair Treads.
Coverage on most surfaces is approx. 250-350 square feet per gallon @ 4 mils wet = 1.5 mils dry (A two-coat application is required for lasting durability).
Drying time @ 77*F with 50% relative humidity.
TO THE TOUCH: 30 – 40 Minutes (tack free)
RECOAT or TOPCOAT: 1-2 Hours
DRY HARD: 72 Hours
FULL CURE: 5 – 7 Days
(Do not expose Non-Skid Paint surfaces to heavy foot traffic in less than 72 hours).