Anti Slip Spray Can Epoxy (premixed) with Grit
Anti Slip Coating for bath tub and shower floor
Maximum Coverage: #1 Anti-Slip Spray Can – 15-20 Square Feet
Qty. #2 – Anti Slip Spray Cans
Starting at $57.97 + Free Shipping
We have all experienced the anxiety and feeling of fear you have when you are about to slip and fall on a wet surface. And in the worst cases you can really hurt yourself. Let me tell you that is a feeling you do not want to experience ever again!
Our Non Skid Paint will eliminate your slippery surface and provide you with the safety, security, sure footing, and peace of mind you deserve and expect.
Ideal safeguard protective coating for areas where water is present or slippery surfaces exist. Easy to apply aerosol can spray on application. Providing a durable, textured coating that is crystal clear, attractive and will help prevent slip and fall accidents before they happen.
Marine Epoxy Anti Slip Paint is eco-friendly, lead-free, chemical, gas and oil resistant, and will not harm the environment when used as directed. Anti Skid texture has no sharp edges and is not abrasive to bare feet. Extra Grit Additive is available for applications needing an increased texture such as stairs treads and vertical Handi-Cap ramps.
. Best Coverage: Marine Anti Slip Coating #200-400 square feet per gallon.
. Our Competitor’s Coverage: Only #100-150 square feet per gallon.
. Super Cost Savings: More than 50% Less per square foot, you decide!
Eco-Friendly * Contains Low VOC’s * Biodegradable
Save Big $ on your annual insurance costs with a Safety First Policy!
Businesses must maintain their floors in slip-resistant condition or face fines up to $50,000 for first offense and up to $100,000 for a second offense. The Americans with Disabilities Act recognizes the importance of maintaining non slip floors and stair treads.
Business owners, municipalities, manufactures, and property owners everywhere know how costly a slip and fall accident can be. They know sooner or later they will have an encounter with a slip and fall accident resulting in injury and possibly a lawsuit.
Lower Insurance Cost
The application of anti slip paint can significantly reduce damage awards in slip and fall lawsuits because the claimant cannot accuse the property owner of negligence. All the while benefits include less insurance claims, lower property insurance and workers compensation insurance.
How-To-Video-Applying Anti Skid Paint – Anti Slip Paint for Boats
ANTI SLIP COLORS IN STOCK:
SHIPSTONE GRAY, CHAMIOS BEIGE, BUTTERNUT, OSHA YELLOW, POLAR WHITE, BLUE, BLACK, HATTERAS OFF-WHITE, and CLEAR
ANTISLIP SPECIAL ORDER COLORS:
SEQUOIA GREEN, RUSSET RED, UMBER BROWN, OSHA ORANGE
ANTI SKID COLOR CHANGES:
It is recommended to use Non Skid Paint in Polar White to add too another color to achieve a lighter shade in that same color. For color consistency use a 2 to 1 ratio (Example: for every 2 gallons of chosen color and add 1 gallon of Polar White).
#300-400 SQUARE FEET PER GALLON @ 4 MILS WET = 1.5 MILS DRY – A two-coat application is recommended for most surfaces, and easy to apply with a brush or 3/8″ inch (low nap) roller.
ANTI SLIP CURING TIME:
Temperature and Humidity Dependent (Apply in temperatures between 50 to 90 degrees *F)
ANTISLIP DRYING TIME:
@ 77 DEGREES *F with 50% RELATIVE HUMIDITY
(Avoid painting late in the day when condensation is likely or if rain is forecasted)
TO THE TOUCH………………………………………30 – 40 Minutes TACK FREE
RECOAT or TOPCOAT…………..…………..……………………………2 – 3 HOURS
DRY HARD…………..………………..……………………………………….72 HOURS
FULL CURE………..…………….…….……………………………………..5 – 7 DAYS
CLEAN UP INFORMATION:
CLEAN HANDS AND TOOLS IMMEDIATELY WITH SOAP AND WARM WATER.
Helpful Tips & Frequently Asked Questions!
DO NOT USE:
On garage floors or other areas where vehicles are parked OR on smooth glossy surfaces such as porcelain.
DO NOT USE:
In areas where there is continuous standing water or where ponding and puddling occurs. These areas must be leveled prior to use of Non Skid Paint..
HOW DO I CLEAN THE AREA PRIOR TO PAINTING?
For Gelcoat and Fiberglass use Acetone. For Non-Ferrous Metals and Aluminum use a Industrial Degreaser and aluminum acid-etch preparation. On Concrete use Trisodium Phosphate (TSP), use a firm bristle brush and rinse off thoroughly with clean water. Area must be completely dry before application. If necessary, use a heat source such as a large Hot Air Floor Dryer. These products are available through most Hardware Stores.
Do I need to add Monster Grit Pumice Additive?
NO, Non Skid Paint comes (pre-mixed) with Grit. Extra Grit Additive is recommended for applications such as Incline Ramps.
Can I use any kind of thinner?
NO, Non Skid Paint is a Water Reducible Epoxy-Ester Coating and can only be thinned with water. Add no more than ½ quart of water per gallon for top coat only. (NOTE: Base coat must be applied directly from pail without thinning)
Why do I need to stir Non Skid Paint so thoroughly and not just shake it up real good?
The Pumice Grit material in Non Skid Paint settles to the top of can, and sometimes sticks to the lid. This is because the Grit is lighter than the Epoxy and will stay suspended and not sink to the bottom of can after thoroughly mixed. It is best to scrap any Grit that is stuck to the lid back into the paint with a wood stir-stick; so as to not lose the designed textured surface. Mix well before and during application.
How do I clean Non Skid Paint off my hands and tools?
Anti Slip Paint is environmentally safe to use, easily clean hands and tools with warm soapy water immediately after application.
How long will it last before I need to topcoat?
It is recommended that on high traffic area’s you topcoat once every 1-2 years as needed. Area’s that have low to medium traffic you can topcoat once every 2-3 years as needed.
What’s the best way to keep Non-Skid Paint clean?
Clean Anti Slip Paint with warm water mixed with any mild soap or detergent. Use a firm bristle brush and rinse off thoroughly with clean water.
Do I need to apply a primer?
Non Skid Paint is self-priming on most surfaces. On wood substrates use a exterior oil base or latex wood primer. For metal surfaces apply an exterior metal primer over clean, dry metal. This will also provide additional rust prevention.
Because application and conditions vary, and are beyond our control, we are not responsible for results obtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the product for the intended use, (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product or refund of its price. Under no circumstance are we liable for incidental and consequential damages.