Non-Hazardous Concrete & Brick Water Proofing Membrane
Water Proof Membrane #1-Gallon Pail WPM-301
Starting at $119.95 + Free Shipping
WPM-301 is a professional, all purpose membrane. It also a high solids waterborne that’s durable, tough and which comes with a very good VOC. WPM-301 comes with rubberized coating and it’s better than similar products thanks to the added strength which is tensile and tenacious. It has great abrasion resistance and it also deals with weather in a simple, yet efficient manner.
Another thing to note about WPM-301 is the fact that it features a dedicated extender and resin structure. This makes it great if you want corrosion resistance which is very handy. You also have to note that the coating is also suitable for use as a sealer in order to fill those narrow cracks. The WPM-301 does a very good job for both home and commercial establishments as well which is a major plus all the time.
The product can be used on the truck beds and it even helps eliminate the hassle from the heavy use surfaces that are usually very hard to deal with in such a situation. WPM-301 is also free of any odor, fume or lead, not to mention that its ingredients are not hazardous, something that will help you quite a lot if you want to stay safe all while harnessing its immense power and benefits.
WPM-301 can work even with the products that are immersed all the time and the abrasion resistance as well as the tensile strength makes it great for industrial use. Since the product isn’t bringing a hazardous coating, it’s not recommended to use as a liner for the potable water. However, you can use it as topcoat over other coatings placed on water puddles or permeating. You can use WPM-301 in order to replace the pitch and tar materials which are heat absorbing.
Water Proof Membrane WPM-301
You can apply the WPM-301 using low pressure sprayers, a roller or a brush. It will cure via drying at around 77F and it will take around 30 minutes to do so. Always remember that you should remove the grease and oil from the surfaces before you use the product. Also, do not ally at temperatures below 50F or over 90F. These won’t allow you to harness the results as you see fit so you should keep that in mind.
When it comes to coverage, the product can deliver around 350 square feet per gallon. It’s not forming any algae, mildew or mold which is a major plus. You should consider cleaning it with clean water whenever you need to. All tools should be cleaned immediately after use otherwise it will be very hard to remove WPM-301 from the equipment.